Meizu M2 LCD Display + Touch Screen Digitizer Assembly Replacement Part

Out of stock
SKU
RA-M2-LCD
Add to Compare
$24.99
100% Brand New and High Quality.
LCD Display and Touch Screen Digitizer Assembly Replacement Part for Meizu M2 / 5.0 inchs.
It is used to replace your broken, damaged, cracked or unusable LCD and touch screen assembly.
Each screen is tested before shipping and are 100% working.If any trouble ,please contact us soon.
Free tools included.
Installation instruction not included,please be sure you know how to install before did.
Accessory ONLY.
Add to Wish List

Note: This item we sell without frame!

Before Installation Notes:

1. Tips 1: Test before installation
When testing, do not remove any protective film or tags. Please pay attention to the problem of static electricity.
Before attempting any repair, be sure to ground yourself is an ESD (electro static discharge) strap. This will prevent static electricity from damaging the electronic components within the phone.
Ensure you wear eye protection and use caution not to cut your finger with the glass splinters.
2. Tips 2: Simulates testing
Screen replacement is very fragile product. We strongly suggest test before installation. Please simulates testing, which means mobile phone apart, (motherboard + LCD or screen) connected audio cable and new replacement, power on, test finished. If test OK, please install it. If it can not show, please contact us at the very first time. And please do not force it to be installed in mobile phone. We will not be responsible if the mobile phone is damaged during installation.
3. Tips 3: Do not over-bend cable
Please make sure LCD cable Do not over-bend. Over 90 degrees bent will cause black display.

Meizu M2 LCD Display

Meizu M2 LCD Display

Meizu M2 LCD Display

Write Your Own Review
You're reviewing: Meizu M2 LCD Display + Touch Screen Digitizer Assembly Replacement Part
Your Rating
Back to Top

Meizu M2 LCD Display + Touch Screen Digitizer Assembly Replacement Part

$24.99