Before Installation Notes
1. Tips 1: Test before installation
When testing, do not remove any protective film or tags. Please pay attention to the problem of static electricity.
Before attempting any repair, be sure to ground yourself is an ESD (electro static discharge) strap. This will prevent static electricity from damaging the electronic components within the phone.
Ensure you wear eye protection and use caution not to cut your finger with the glass splinters.
2. Tips 2: Simulates testing
Screen replacement is very fragile product. We strongly suggest test before installation. Please simulates testing, which means mobile phone apart, (motherboard + LCD or screen) connected audio cable and new replacement, power on, test finished. If test OK, please install it. If it can not show, please contact us at the very first time. And please do not force it to be installed in mobile phone. We will not be responsible if the mobile phone is damaged during installation.
3. Tips 3: Do not over-bend cable
Please make sure LCD cable Do not over-bend. Over 90 degrees bent will cause black display.
All happy!Review by alfawzan / (Posted on 3/21/17)All happy! came for 3 weeks in the Crimea! put 2 hours because there was no experience! fainter native screen 100%. if you disable Auto Brightness like that. be careful when installing as the bolts of different sizes! I put a little wrong and erased paint near the button, now a small point but not critical! all the best!
everything is fine!Review by Kumar / (Posted on 3/20/17)I order the third screen from this . everything is fine! I recommend! ordered Mar 3rd, Mar 18th received in the goods.